4 Ways To Measure Countertops

If you are you keeping your current appliances and fixtures, roughly draw your existing appliances, sinks, and faucets on the diagram. If you are you replacing your existing appliances or altering the layout of your space, sketch the location of your new appliances, sinks, and or faucets on the diagram. It is also helpful to note the type of sink, refrigerator, stove, and range found in your space.

If you intend to keep your existing cabinetry, draw the current layout of your cabinets on your diagram. If you intend to alter the layout of your space and or replace your cabinets, sketch the new cabinetry layout or use an online program to design your space.

Choose an edge type for your countertops: 3⁄8 inch (1. 0 cm) rounded solid surface, eased stone, bevel stone, ogee stone, or bevel solid surface. [2] X Research source Mark any sweeps, or rounded overhangs.

Do not stop measuring when you reach a sink, but continue to measure beyond the sink until you reach the end of a cabinet, appliance, or a wall. [3] X Research source If you have an L-shaped countertop, measure the long side first, followed by the short side from the back edge. Add the total measurements together to treat it like one countertop.

If you have a backsplash, account for its dimensions in your final measurement.

Calculate the area (or square inches) of each section by multiplying the length times the width of each section (Length x Width = Area). Calculate the total square inches by adding together the areas of each section. Calculate the square footage by dividing the total square inches by 144 (Total Square Inches ➗ 144 = Total Square Footage). [4] X Research source

To account for the overhang of an island, you must add 3 inches to the length and 3 inches to the width.

Measure the length of the backsplash for each section of countertop. Add the lengths together. Multiply the total length of the backsplash by 4 inches (the height of the backsplash). Divide the product by 140 to calculate the total square footage of your backsplash. Add this number to the total square footage of your countertops.

When measuring this layout, you must first verify that your corner is a 90° angle. Measure and mark 3 feet from the corner along one wall. Measure and mark 4 feet from the corner along the other wall. Measure the diagonal distance between the two points. If the distance is 5 feet, then your corner is square. Divide the counter into two sections. To determine the length of section A, measure from one end of the counter to the wall. To determine the width of section A, measure from the front edge of the counter to the wall. To determine the length of section B, measure from the opposite end of the counter to the wall. Subtract the width of section A to get the length of section B. To determine the width of section B, measure from the front edge of the counter to the wall. Calculate the area (or square inches) of each section by multiplying the length times the width of each section (Length x Width = Area). Calculate the total square inches by adding together the areas of each section. Calculate the square footage by dividing the total square inches by 144 (Total Square Inches ➗ 144 = Total Square Footage). [6] X Research source