4 Ways To Set Up Two Computers For Lan

If you have more than one network, this icon will be identified as “multiple networks. "

Type in the IP address you wish to use or this one for example: 192. 168. 0. 1. The number one at the end of this represents what the computer will be using it can be either 1 or 2.

If you have more than one network, this icon will be identified as “multiple networks. "

If you don’t have an Ethernet port, you can also use a USB-to-Ethernet adapter.

Class “A” NetworksWhen the first number is 0 to 127The Mask is - 255. 0. 0. 0 Class “B” NetworksWhen the first number is 128 to 191The Mask is - 255. 255. 0. 0 Class “C” NetworksWhen the first number is 192 to 223The Mask is - 255. 255. 255. 0 IPv4 originally used the first number (ex. 192) to determine which part of the address is the network and which part is the host based on the address class. However, the advent of subnetting and classless networking made it necessary to provide a mask because other ways of dividing the address into network and host portions are now possible.

Bring up MS-DOS or the equivalent on other OS’s. For Windows, open the command prompt which is located in the Start Menu, then go to “Accessories” and then “Command Prompt. " Type in: “ping” and insert the IP address of the other computer here (ex. 192. 168. 1. 1). If you cannot reach the other computers address, read over the steps again or contact a professional.